Monochromators
- High aperture ratio (f=1:3.6)
- Low stray light
- Up to three diffraction gratings mounted on the automated turret
- Cover a wide spectral range with the use of just one compact device
- Both output ports of the m150 have fully functional flat field 30 x 10mm


Spectrometer
- High resolution performance – <1.0 nm (FWHM) optical resolution
- Rapid acquisition speed -- 1 µs minimum integration time
- Great thermal stability -- Thermal stability to 0.06 pixels/°C
Camera
- 480 Mbit/s high-speed USB 2.0
- USB bus-powered
- Plug & Play
- Supports various CCD and CMOS line sensors
- 16-bit high-speed ADC
- Correlated Double Sampler (CDS)
- 1~6x Programmable Gain, 64 increments
- ±300 mV Programmable Offset, 512 increments
- 2 programmable internal reference voltage 2V and 4V
- Trigger input
- 100kHz I2C-Master Interface
- Ready to use software, no installation required
- Software development kit with drivers, DLL and sample programs
- Supports Windows, Linux and Raspbian (Raspberry PI)
- Very compact design 66 x 48 x 7.7 mm³ (without sensor)
- Integration time and frame rates are CCD/CMOS line sensor specific

Specification
Cameras
Model | Photodiode type | Size | TE cooled | Photosensitivity |
---|---|---|---|---|
IO CAM S2011 | Si | 14 µm × 200 µm (2048 pxl) |
No | 0.45 A/W @ 0.96 µm |
IO CAM AB1017 | IGA | 25 µm × 500 µm (512 pxl) |
No | 0.95 A/W @ 1.55 µm |

Detectors
Two-color detectors provide a wider detection range in the same size. Wherein they are less sensitive and require high gain. In the majority of cases, it causes an enlarged noise lever. Usually, the IO DET M3817 and IO DET M3825 are good choices for general-purpose interference coatings. These detectors are compromised solutions between flexibility, price, and performance.
Specification
Photodiodes
Model | Photodiode type | Size | TE cooled | Photosensitivity |
---|---|---|---|---|
IO DET S2011 | Si | □2.4 mm | Yes | 0.45 A/W @ 0.96 µm |
IO DET M3817 | Si IGA |
□2.4 mm ⌀1 |
Yes | 0.42 A/W @ 0.94 µm 0.55 A/W @ 1.55 µm |
IO DET M3825 | Si IGA extended |
□2.4 mm ⌀1 |
Yes | 0.42 A/W @ 0.94 µm 0.6 A/W @ 2.3 µm |
IO DET AB1017 | IGA | ⌀1 | Yes | 0.9 A/W @ 1.3 µm |
IO DET AB1025 | IGA extended | ⌀0.5 | Yes | 1.3 A/W @ 2.3 µm |